Old Wooden Frame without glass (sorry, puppy painting not included!)
One sheet of metal cut to frame insert size (we got ours cut at Home Depot and used 22 gauge steel)
Gloss/Enamel Spray Paint (in any color you prefer)
Old pill bottles (for brush containers)
Spray glue or regular Elmer’s Glue
Magnets (available at your local craft store)
One yard of thin (not transparent) fabric
Step 1: Spray paint
In a well-ventilated outdoor area, spray-paint an old wooden frame (we found ours for $3 at the thrift store!). Apply your first coat, wait a few minutes, then mist on the second coat for a high-shine, opaque finish. Spray paint your pill bottles with any color you wish (we chose black for a neutral and clean finish). Wait 20 minutes for these to dry completely.
Step 2: Cut and glue
While your frame and brush holders are drying, attach your fabric to the pre-cut metal sheet. Lay out your fabric with the back facing up. Cut the excess fabric, and lightly mist a layer of spray glue on top of the metal. You can use regular school glue, but spray glue gives a more even finish on the metal. Remember to put newspaper underneath for easy clean-up.
Step 3: Fold fabric
Fold your fabric on the metal lengthwise first, then fold the other edges in. Remember to pull tight on each fold for a smooth, taut, and flat finish in the front.
Step 4: Attach magnets
Heat up your hot glue gun. When it’s ready to go, glue a dot in the center of your magnet, then immediately attach it to the center back of the makeup and containers you want on the board. We used more heavy-duty magnets to ensure the makeup would stick, but the regular refrigerator variety works just as well. For more linear items, use two magnets for an even hold.
Step 5: Fit into frame
If your frame feels completely dry to the touch, it’s ready to go. Secure your fabric-covered metal into the frame. Place your makeup on the board and play around with placement. Prop the frame up and you’ve got yourself a fantastic way to visually organize your collection!