- Paper for making narrow strips: computer paper, craft paper, construction paper, etc.
- Optional: Craft knife, paper cutter, tweezers, markers, beads, and ribbon.
- To help size coils: Small lids, curtain rings, or washers
- Pencil and ruler
- White glue (Elmer’s, PVA)
- Wax paper
- Other quilling winders: Round pencils, sewing needles (1 or 2 mm), knitting needles, T-pins, or a cocktail stirrer
This project is rated EASY to do.
How to Make Quilling Coils and Scrolls
Read all of the steps before starting.
Step 1: Cut Paper Strips
Quilling is most often done with 1/8″- (3 mm) wide strips of paper. Beginners will find that ¼”- (6 mm) wide strips are easier to handle, and younger children will do best with ½” to 1″ (12 – 25 mm) wide strips. Use scissors or a craft knife to cut twenty or more strips. You can also use a paper cutter or trimmer for cutting strips, and some inexpensive paper shredders make ¼”-wide strips.
Tip: As an aid in cutting strips, download and print a paper strip cutting guide on colored or white computer paper.
1/8″ Cutting Guide
1/4″ Cutting Guide
1/2″ Cutting Guide
Step 2: Winding Coils
There are over thirty basic quilling shapes. Most of these shapes are based on a simple closed coil or use the technique of winding. In this project, you’ll learn how to make these twelve shapes.
To wind a coil, you will need a round toothpick and a strip of paper.
- Moisten your thumb and index finger. Place the top of the paper strip against the index finger.
- Put the toothpick across the top of the strip near the top. With your thumb, curl the paper over the toothpick. This will start the coil.
- Without moving the toothpick, use your thumb and index finger to wind the paper.
- When the paper is completely wound, carefully slip it off the toothpick.
Tip: If you can’t find a round toothpick to use as a winder, wrap a little masking tape around a square toothpick. Other things to use as quilling winders are round pencils, sewing or yarn needles (1 or 2 mm), knitting needles, T-pins, or a cocktail stirrer. Children may find a round pencil easier to use as a winder.
Step 3: Sizing and Gluing Coils
Skip this step if you are making an open coil, one of the scrolls (heart, V, or S), or the V.
Spread out a sheet of wax paper to put your glued coils on. Use a white glue that dries clear, and apply a dab with a toothpick on the inside of the coil’s tail end. Hold the coil loosely and let it expand to the desired size. Then press the glued spot against the coil and hold for a few seconds.
Your coils can be sized more easily by using a sizing aid. Anything ring-shaped will work—washers, curtain rings, small bottle caps, etc. You can also make a wooden frame for sizing by gluing two toothpicks across two more toothpicks. Use a small round object of the target size to space the toothpicks. Buttons and coins work well.
Step 4: Shaping Coils
Each of the basic quilling shapes starts with a winding; then they are sized, and some are glued. Pinching and curling are used to form other shapes from simple closed coils. Practice making each shape before trying a quilling project.
Follow these instructions for making eight basic coil shapes:
Open: Wind a strip, but stop about 1″ (25 mm) from the end. Let the coil spring open. Do not apply glue.
Closed: Wind a strip to the end. Before gluing, allow the coil to expand to the size you want.
Tight: Wind a strip to the end. Glue the end without letting the coil expand. Hold it firmly until the glue sets.
Large: Use a pencil for winding. You may want to glue the coil before taking it off the pencil. For even larger coils, use dowel rods.
Teardrop: Wind and glue a loose coil. Pinch one side of the coil.
Eye: Wind and glue a loose coil. Pinch on opposite sides of the coil.
Petal: Wind and glue a loose coil. Pinch one side of the coil, and curl the point in one direction.
Leaf: Wind and glue a loose coil. Pinch on opposite sides of the coil, and curl the two points in opposite directions.
Step 5: Making Scrolls
Each of the scroll shapes starts with one or more windings. Pinching and curling are also used to form the shapes. Practice making each shape before trying a quilling project.
Heart scroll: Pinch the paper strip in the middle. Wind each end toward the middle. The coils are allowed to spring apart and are usually left unglued. The scroll may be glued where the coils meet.
V scroll: Pinch the paper strip in the middle. Wind each end away from the crease. A closed V scroll can be made by gluing the middle of the V together.
S scroll: Wind one end of the paper strip just past the center. Release and turn the strip. Wind the other end just past the center, and release.
V: Fold a very short strip of paper in half. Curl the ends away from the fold.
Step 6: Using Coils and Scrolls
The real art of quilling is when you combine a variety of quilling shapes to make pictures and decorations. Make six eye coils or teardrop coils and glue them together to form a flower with a tight coil center, or make a vine with a strip of green paper and several teardrop coils. The possibilities for combinations are endless.
Assemble your designs on wax paper, using a toothpick to apply the glue. After a design is complete, you can use it to decorate anything— a gift tag, card, picture, pendant, napkin ring, jewelry box, etc. Use glue to attach your decoration.
Tip: For your first coils, start with 1/8″ paper strips that are 4″ to 6″ long and form closed coils that are 3/8″ to 1/2″ in diameter. The closed coils can be shaped into teardrop, eye, petal or leaf shapes and combined to form any number of designs.
See below incredible ideas and designs created with the art of quilling!
Quilling’s uses are endless!
Harika, sanat, yaratıcı,yetenek… Çok güzel.