- Round-nose pliers
- Diagonal cutting pliers
- 24 gauge craft wire
- Sewing tape measure
1)Measure the circumference of your head across your forehead.
2)Measure and cut a piece of wire 6 times the length of the circumference of your head.
3)Fold the long piece of wire in half around the round-nose pliers and begin twisting the wire. Continue until you have 4 inches of twisted wire.
4)Once you reach 4 inches (which should be just at the back of your right ear), take a bead and thread it onto the wire. Determine how long you want the first “branch” to be and fold the wire at that length with the bead in the middle and twist all the way down.
5)Twist for 1 inch and then add another bead. The space in between each “branch” can vary from ½ – 1 inch, it’s up to you. To create a “branch” with two stems, twist half way down on the “branch” you are working on, then add a second bead and twist until they meet up and then twist the rest of the way down.
6)Continue twisting and adding “branches” as you please, making sure to measure the progress you’ve made by holding it up against your forehead and looking in a mirror. The last “branch” should end just past your left ear. Once you’ve reached this point, twist for 4 inches.
7)After the 4 inches, wrap one of the ends of the wire around the round-nose pliers. Twist that wire around the end a few times and then use the diagonal cutting pliers to cut off the remaining wire as well as the other end of the wire. Then, cut two pieces of ribbon long enough to tie into a bow and attach to the loop on each end with a knot.